Opel Astra, Zafira

Since 1998 of release

Repair and car operation



Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting/alarm devices
   Adjustment of a direction of optical axes of headlights
   Removal and installation of a combination of devices
   Removal and installation of components of the panel of devices
   Removal and installation прикуривателя
   Removal and installation of small horns of a horn
   Removal and installation of levers (leads) of screen wipers
   Removal and installation of elements of a drive of screen wipers
   Removal and installation of components of system of washing of glasses
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and audiosystem installation / the navigating block
   Removal and installation of elements of remote control by audiosystem functioning
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system and system иммобилизации the engine - the general information
   The gauge of speed of movement of the car (VSS) - the general information
   System of additional safety (SRS) - the general information
   Removal and installation of elements SRS
   Schemes of electric connections - the general information
   + Basic schemes of electric connections



Removal and installation of an audiosystem / of the navigating block

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!


Two special tools of stripper DIN be required.

Autoradio tape recorder

 PERFORMANCE ORDER

  1. Шестигранным прутковым a key (Allen) turn out fixing screws in four corners of the control panel of an autoradio tape recorder.
  1. Fill strippers DIN in apertures from under fixing screws, - strippers should be latched in internal clamps of assemblage.
  1. Dissolve скобы strippers in the parties and accurately take assemblage of a radio tape recorder from the central section of the panel of devices, - pay attention that contact sockets of the block have a quick disconnect design.
  1. If it is required, turn out the fixing screw, unbend the lock uvulas located on each side and take from the panel of devices an assembly box of a radio tape recorder. Disunite contact sockets of electroconducting and an antenna cable in a back part of an assembly box.

    A — the Screw of fastening of an assembly box of an autoradio tape recorder (lock uvulas are located on each side from a box first line)
    B — the Detachment of an antenna cable
    C — an electroconducting Detachment (model Zafira)
    D — Extraction of an assembly box of an autoradio tape recorder (model Astra)

A.

B.

C.

D.
  1. Installation is made upside-down. Track correctness of connection of contact sockets. In summary instal a security code of input of an audiosystem.

CD-player

6

 PERFORMANCE ORDER

  1. Remove a ware box (the Body see the Head).
  2. Release fixture and remove a player in gathering with a basic arm from a ware box, - track, that electroconducting has been liberated.
  3. Turn out fixing screws and remove a player from a basic arm.
  4. Installation is made upside-down.

Navigation system

Type NDCR 3000

 PERFORMANCE ORDER

  1. Press the button of a clamp and remove from the navigating block the control panel.
  1. Fill strippers DIN in special apertures from both parties of the block, - strippers should be latched in internal clamps of assemblage.

    A — the Screw of fastening of an assembly box of an autoradio tape recorder (lock uvulas are located on each side from a box first line)
    B — the Detachment of an antenna cable
    C — an electroconducting Detachment (model Zafira)
    D — Extraction of an assembly box of an autoradio tape recorder (model Astra)

A.

B.

C.

D.
  1. Dissolve скобы strippers in the parties and accurately take the navigating block from the panel of devices.
  2. If it is required, turn out fixing screws and take from the panel of devices an assembly box of the navigating block. Disunite contact sockets of electroconducting and an antenna cable in a back part of an assembly box.
  3. Installation is made upside-down.

Other types

Procedure is similar resulted above (the Autoradio tape recorder see).

The block of management of navigating system

Procedure is similar resulted above (CD-player see).