Opel Astra, Zafira

Since 1998 of release

Repair and car operation



Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   Adjustment of the mechanism of a choice of transfers
   Removal and installation of a cable of a choice of transfers
   Removal and installation of assemblage of the lever of selector AT
   Replacement of epiploons
   Cooler ATF - the general information
   Removal and installation of electric components of control system АТ
   Removal and installation АТ
   Major repairs АТ - the general information
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Adjustment of the mechanism of a choice of transfers

Switching-off of the storage battery in position «Р» of the selector lever will lead to blocking of the last. For lever clearing it is necessary to remove accurately from the central console the sealing element established round its basis, then a small screw-driver with a flat sting to wring out a lock uvula to the left of the selector lever.


 PERFORMANCE ORDER

  1. Translate the selector lever in salon from extreme forward position in extreme back, and make sure of conformity of serially chosen positions to indicator indications, — in case of need demanded adjustment (see further).
  2. Establish the lever in position «P».
  3. For the purpose of providing of access to a cable of a choice of transfers remove the storage battery with the adjusting pallet (the engine Electric equipment see the Head).
  1. Find from above on картере transmissions a basic arm of fastening of a cable of a choice of transfer liberate from it a tip of the last, accurately having extended a clamp.
  1. Make sure of that the selector lever is in position «Р», then develop the executive lever on картере transmissions forward against the stop, having switched that АТ in position «Р». Having latched a clamp, fix a cable of a choice of transfers in the given position.
  1. Establish and connect the storage battery, then check up serviceability of functioning of the selector, — in case of need repeat adjustment.