Opel Astra, Zafira

Since 1998 of release

Repair and car operation

Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
- Automatic transmission
   Adjustment of the mechanism of a choice of transfers
   Removal and installation of a cable of a choice of transfers
   Removal and installation of assemblage of the lever of selector AT
   Replacement of epiploons
   Cooler ATF - the general information
   Removal and installation of electric components of control system АТ
   Removal and installation АТ
   Major repairs АТ - the general information
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Replacement of epiploons

Epiploons of power shafts

Check of serviceability of functioning, removal and installation of the gauge-switch of fires of a backing see.

Epiploon of a shaft of the hydrotransformer


  1. Remove transmission (Removal and installation АТ see).
  2. Accurately shift hydrotransformer assemblage on a shaft, — prepare for gathering of a spilt liquid.
  3. Try to remember a site and an order of installation of an epiploon in the pump case. Accurately having hooked the big screw-driver, take an old epiploon, — try not to damage a wall of a landing nest and a surface of a pin of a shaft.
  4. Carefully smooth out surfaces of a landing nest interfaced to an epiploon and shaft pins, then it is accurate, запрессуйте a new epiploon in a landing nest sealing sponges in transmission.
  5. Grease sponges of an epiploon fresh ATF and accurately shift the hydrotransformer on a shaft in transmission.
  6. Establish transmission on a place (Removal and installation АТ see).