Opel Astra, Zafira

Since 1998 of release

Repair and car operation



Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
- The power supply system and release
   - The power supply system
      Sbrasyvanie pressure in the power supply system of petrol engines
      Check of a condition and replacement of fuel lines and them штуцерных connections
      Removal of air from a fuel path of the diesel engine
      Removal of pollution from the power supply system of the diesel engine
      Removal and installation of components of an inlet air path
      Removal, installation and adjustment of a cable of gas - petrol models
      Removal and installation of a pedal of an accelerator
      Removal and installation of the fuel pump - petrol models
      Removal and installation of the gauge of a stock of fuel
      Removal and installation of a fuel tank
      Removal and installation of the case of a throttle - petrol models
   + System of injection of fuel of petrol engines
   + Systems of injection and turbo-supercharging of the diesel engine
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Removal and installation of the gauge of a stock of fuel

The prevention in the beginning of section of Sbrasyvanie of pressure in the power supply system of petrol engines see.


At installation the new sealing ring of a cover is required.


 PERFORMANCE ORDER

  1. On petrol models the gauge of a stock of fuel is located on one frame with the fuel pump and is fixed sideways on the case of the last. Operate according to instructions – Removal and installation of the fuel pump - petrol models see.
  1. For gauge removal accurately release elements of its fixture (1 - a clamp), then, having pulled upwards, liberate the gauge from a support.
  1. On diesel engines the gauge is placed in the frame lowered in a fuel tank, - operate according to instructions – Removal and installation of the fuel pump - petrol models see.
  2. At extraction of the gauge from an aperture in a tank and its installation back try not to admit deformation of the lever of a measuring float.