|
Removal, installation and adjustment of doors
Backlashes of landing of doors
Forward doors
Removal and installation
|
|
- Completely open a door and prop up it from below racks, having laid rags.
- Disunite a socket of conducting from a door first line, - take a clamp, turn a lock ring and extend the tip from the socket.
|
- Turn out a bolt of type TORX of fastening of the door terminator to a rack And.
|
|
- At a corresponding complete set remove petal caps from axes of loops, then beat out axes with the help выколотки, - ask the assistant to support a door. Remove a door from the car. At door replacement transfer on it with old all demountable components.
|
|
|
|
On models without lateral pillows of safety in a door the pig should be established. |
|
|
- Installation is made upside-down.
|
|
Adjustment
Door loops are welded on a door and a body rack that excludes adjustment possibility.
|
|
- In case of need apertures in loops can be рассверлены, and axial fingers are replaced утолщенными.
|
- The density of closing of a door can be adjusted by displacement of the drummer of the lock on кузовной to a rack In, - for отпускания fixture it is required шестигранный прутковый a key (Allen) (Backlashes of landing of doors see an illustration).
|
|
|
Back doors
Removal and installation
|
|
- Completely open a door and prop up it from below racks, having laid rags.
|
- Disunite a socket of conducting from a door first line, - turn a lock ring and extend the tip from the socket.
|
|
- Turn out a bolt of type TORX of fastening of the door terminator to a rack of Century
|
|
- At a corresponding complete set remove petal caps from axes of loops, then beat out axial fingers with the help выколотки, - ask the assistant to support a door. Remove a door from the car. At door replacement transfer on it with old all demountable components.
|
|
- Installation is made upside-down.
|
|
Adjustment
Door loops are welded on a door and a body rack that excludes adjustment possibility.
|
|
- In case of need apertures in loops can be рассверлены, and axial fingers are replaced утолщенными.
- The density of closing of a door can be adjusted by displacement of the drummer of the lock on a rack With, - for отпускания fixture it is required шестигранный прутковый a key (Allen) (Backlashes of landing of doors see an illustration).
|
|
|