Opel Astra, Zafira

Since 1998 of release

Repair and car operation

Removal and installation of seat belts

The scheme of fastening of a seat belt of a forward seat


1 — Top regulated анкерный knot 2 — Bottom анкерный knot / the module emergency натяжителя a belt 3 — Bottom анкерный knot	4 — the Returnable device 5 — Directing скоба

Forward belt and the returnable device

PERFORMANCE ORDER

Remove a forward seat (Removal and installation of forward seats see). Release fixture and remove the coil from the bottom part of a rack of V.Snimite the end of a belt from the coil.
Pull together rubber consolidation from a rack In and remove the top and bottom decorative overlays of a rack. Overlays fasten clamps for which removal the screw-driver with a wide sting is required шлицевая, - try to remember adjusting position of panels.
Having passed through a groove, liberate a belt from the top finishing panel.
Turn out a fixing bolt and remove a loop of a belt with top regulated анкерного knot (the Scheme of fastening of a seat belt of a forward seat see an illustration). In case of need disconnect the external decorative panel, turn out fixing screws and remove top regulated анкерный knot from a rack In (the Scheme of fastening of a seat belt of a forward seat see an illustration). Liberate a belt from directing скобы on a rack In (the Scheme of fastening of a seat belt of a forward seat see an illustration).
For the purpose of providing of access to the bottom part of a rack In remove an internal decorative overlay of a threshold.
For the purpose of providing of access to a nut of fastening of the returnable device, take a stopper established from lateral aspect of a rack of V.Dlja отворачивания of a nut from вваренной in a rack of a hairpin the deep face head is required. The hairpin is established that the nut did not fail in a rack and under a threshold. Give a nut and remove from a rack a drum of the returnable device the belt together reeled up on it (the Scheme of fastening of a seat belt of a forward seat see an illustration).
Ankernyj knot of a seat belt will tighten a bolt to an internal part of a seat, - the same bolt is used also for fastening of the module emergency натяжителя a belt. Installation is made upside-down. Before вворачиванием fixing bolts grease their carving part fixing анаэробным with hermetic. Track, that all fixture has been tightened with demanded effort.

Back seat belt and the coil

PERFORMANCE ORDER

Remove the back panel of internal furnish of salon (Removal and installation of panels of internal furnish of salon see), - one of making elements of the given procedure is отворачивание a bolt of fastening of the bottom loop of a belt.
Turn out a fixing bolt and remove the top loop, - on models Zafira it привернута to a height regulator.
On models Zafira remove an overlay and turn out a bolt of fastening of a belt to the bottom lateral panel.
On models Zafira disconnect directing from a rack With and remove it from a belt.
Turn out a fixing bolt and remove the coil with кузовного an element a drum of the returnable device.
On models Zafira turn out fixing screws and remove from a rack With top regulated анкерный belt knot.
Bottom анкерный the knot acts in film by отдавания a bolt of its fastening after removal of a back pillow of a seat.
Installation is made upside-down. Before вворачиванием fixing bolts grease their carving part fixing анаэробным with hermetic. Track, that all fixture has been tightened with demanded effort.

Seat belt of the third row of seats and the coil (Zafira)

PERFORMANCE ORDER

Remove a covering of a floor of a luggage space. Remove the top section of lateral furnish of a luggage space.
Remove заглушку and give the fastening screw анкерного seat belt knot to a rack With.
Also remove the bottom loop.
Turn out fixing screws and remove from a rack With directing a belt. Remove the bottom section of lateral furnish of a luggage space.
Turn out a fixing bolt and remove with кузовной panels a drum of the returnable device of a belt.
For removal bottom анкерного knot it is necessary to dismantle the central overlay.
Installation is made upside-down. Before вворачиванием fixing bolts grease their carving part fixing анаэробным with hermetic. Track, that all fixture has been tightened with demanded effort.

The central belt of the third row of seats (Zafira)

PERFORMANCE ORDER

Remove a pillow and a back of a back seat (Removal and installation of back seats see).
For the purpose of providing of access to анкерным to knots of the central seat belt turn out fixing screws and uncover.
Turn out fixing bolts and remove анкерные knots from the floor panel.
Disconnect from the coil a cable and turn out a bolt of fastening of the coil to a back.
Installation is made upside-down, - track, that all fixture has been tightened with demanded effort.