- Remove from an internal end face of the cylinder the carriage and the lever, - try to remember adjusting position of components. Also remove торсионную and screw springs (see an illustration of the Detail of installation of the cylinder of the lock of a forward door).
- With paint mark position of the case of the cylinder concerning a plate. With the help выколотки in diameter 2.5 mm beat out a pin of a fixing spring, - try not to damage aperture edge.
- Remove the lock cylinder, directing plug, balls and a clamp.
|
|
The lock cylinder is replaced complete with a clamp. |
- Installation is made upside-down, - do not forget расчеканить a pin of a fixing spring.
|