- Put on protective gloves and accurately press on the top internal (1) corner of glass that the bottom external corner (2) has acted. In case of need help itself, having hooked a corner (2) screw-driver. The top internal fastening can be released, having hooked a small screw-driver., having pushed it in an aperture in the mirror case.
|
|
- At a corresponding complete set disconnect two wires from an element of heating of a mirror, holding приклепанные pins not to damage a design.
- At a corresponding complete set connect conducting to a heating element. Establish glass, accurately having combined plastic clamps. Press glass to защелкивания clamps.
|
|