|
Removal and installation of the condenser of a central air of air
|
|
- Make a discharge of a central air in the conditions of a specialised workshop.
- At a corresponding complete set open a cowl and disconnect electroconducting from the electromotor of the additional fan of system of cooling located under a forward bumper.
- Turn out bolts and disconnect refrigerator tubes from the condenser and a receiver-dehumidifier. Disconnect electroconducting from the pressure gauge-switch in system.
- Turn out bolts of fastening of a receiver-dehumidifier.
- Turn out the top bolts of fastening of the condenser to a radiator and remove it from the bottom basic clamps. Remove the condenser in gathering with a receiver-dehumidifier.
- In case of need the receiver-dehumidifier can be separated from the condenser.
|
|
Installation is made upside-down.
|
|
The central air recharge should be made in the conditions of a car-care centre workshop. |
|