Opel Astra, Zafira

Since 1998 of release

Repair and car operation


Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
- Engine electric equipment
   Specifications
   - Electronic control system of ignition (and injection) petrol engines
      Checks of serviceability of functioning of system of ignition
      Diagnostics of malfunctions - the general information and preliminary checks
      System of onboard self-diagnostics OBD - the general information
      Application of an oscillograph for supervision of workers of a control system
      Removal and installation of the module of ignition
      Check and installation of a corner of an advancing of ignition
      Removal and installation of the switch of ignition
      Removal and installation of the gauge of emergency pressure of oil
      Removal and installation of the gauge of level of impellent oil
      Removal and installation of the gauge of temperature of impellent oil (diesel models)
   + Systems of preheat and heating of fuel of the diesel engine
   + Charge and start systems
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of the gauge of temperature of impellent oil (diesel models)

Removal

 PERFORMANCE ORDER

  1. At a corresponding complete set remove protection картера.
  2. Turn out a drain stopper and merge impellent oil (Routine maintenance see the Head).
  3. The gauge (if it is established) is in a forward part of the pallet картера the engine, - disconnect from it electroconducting.
  1. Turn out the gauge from the pallet.

Installation

 PERFORMANCE ORDER

  1. Establish a new sealing ring and slightly grease a carving part of the gauge with fixing hermetic.
  2. Screw the gauge in the pallet, - try not to strip a thread.
  3. Attach electroconducting.
  4. Establish protection картера.
  5. In summary fill in oil in the engine (Routine maintenance see the Head).