Opel Astra, Zafira

Since 1998 of release

Repair and car operation



Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
- The engine
   Specifications
   Check компрессионного pressure in cylinders
   Diagnostics of a condition of the engine with vacuum gauge application
   - Procedures of repair of petrol engines SOHC without their extraction from the car
      Reduction of the piston of the first cylinder in position of the top dead point of a step of compression (ВМТ)
      Removal and cover installation газораспределительного the mechanism
      Removal and installation of a pulley of a cranked shaft
      Removal and installation of a cover of drive ГРМ
      Removal and installation of a belt of drive ГРМ
      Removal and installation натяжителя газораспределительного a belt and cogwheels of drive ГРМ
      Replacement of an epiploon of a camshaft
      Removal, check of a condition and installation of a camshaft from the case газораспределительного the mechanism
      Removal, check of a condition and installation of components of a drive of valves
      Removal and installation of a head of cylinders
      Removal and pallet installation картера
      Removal, service and installation of the oil pump
      Removal, check of a condition and flywheel / installation приводного a disk
      Replacement of epiploons of a cranked shaft
      Check of a condition and replacement of support of a suspension bracket of the power unit
   + Procedures of repair of petrol engines DOHC without their extraction from the car
   + Procedures of repair of diesel engines of 1.7 l and 2.0 l without their extraction from the car
   + The general and engine major repairs
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Replacement of epiploons of a cranked shaft

Right (from outside drive ГРМ) an epiploon

 PERFORMANCE ORDER

  1. Remove a cogwheel of a cranked shaft (Removal and installation натяжителя газораспределительного a belt and cogwheels of drive ГРМ see).
  1. Accurately drill or punch two apertures in a rigid face surface of an epiploon. Screw in apertures pair саморезов. Grasp nippers heads of screws and accurately take an epiploon from a landing nest, — try not to damage the case of the oil pump.
  1. Smooth out contact surfaces of a landing nest and a shaft pin, carefully having removed from them an agnail and the tease, capable to lead to failure of a new epiploon.
  1. Grease sealing sponges of a new epiploon with pure impellent oil and by means of cylindrical оправки in regular intervals запрессуйте an epiploon in a landing nest sponges inside and заподлицо with a case surface.

In quality оправки the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter will approach, — track, that оправка rested only against rigid edge of an epiploon.

  1. Remove traces of oil and establish a cogwheel of a cranked shaft (Removal and installation натяжителя газораспределительного a belt and cogwheels of drive ГРМ see).

Left (from outside a flywheel) an epiploon

 PERFORMANCE ORDER

  1. Remove a flywheel / приводной a disk (Removal, check of a condition and flywheel / installation приводного a disk see).
  2. Accurately drill or punch two apertures in a rigid face surface of an epiploon. Screw in apertures pair саморезов. Grasp flat-nose pliers heads of screws and accurately take an epiploon from a landing nest.
  3. Smooth out contact surfaces of a landing nest and a shaft pin, carefully having removed from them an agnail and the tease, capable to lead to failure of a new epiploon.
  1. Grease sealing sponges of a new epiploon with pure impellent oil and by means of cylindrical оправки in regular intervals запрессуйте an epiploon in a landing nest sponges inside and заподлицо with a block surface.

In quality оправки the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter will approach, — track, that оправка rested only against rigid edge of an epiploon.

  1. Remove traces of oil and establish into place a flywheel / приводной a disk (Removal, check of a condition and flywheel / installation приводного a disk see).