Opel Astra, Zafira

Since 1998 of release

Repair and car operation



Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting/alarm devices
   Adjustment of a direction of optical axes of headlights
   Removal and installation of a combination of devices
   Removal and installation of components of the panel of devices
   Removal and installation прикуривателя
   Removal and installation of small horns of a horn
   Removal and installation of levers (leads) of screen wipers
   Removal and installation of elements of a drive of screen wipers
   Removal and installation of components of system of washing of glasses
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and audiosystem installation / the navigating block
   Removal and installation of elements of remote control by audiosystem functioning
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system and system immobilization the engine - the general information
   The gauge of speed of movement of the car (VSS) - the general information
   System of additional safety (SRS) - the general information
   Removal and installation of elements SRS
   Schemes of electric connections - the general information
   + Basic schemes of electric connections


Removal and installation of elements of a drive of screen wipers

Windscreen cleaners

 PERFORMANCE ORDER

  1. Remove levers of both screen wipers (Removal and installation of levers (leads) screen wipers see).
  2. Remove rubber consolidation from an upper edge of a partition of an impellent compartment and a plastic lattice of the reflector established under a windscreen (illustrations the Scheme of an arrangement of the elements subject to removal established along a bottom edge of a windscreen (model Astra) and the Scheme of an arrangement of the elements established along a bottom edge of a windscreen (model Astra) see).
  1. Disconnect hoses from snuffled givings on glass of a washing liquid.
  1. Where it is required, give fixing nuts and remove from a partition a reflector.

    A — Otdavanie of a nut of fastening of a reflector (model Zafira)
    B — Removal of a plate of a reflector from a partition of an impellent compartment

A.

B.
  1. Disconnect conducting from the electromotor of a drive of cleaners of a windscreen.
  2. Turn out fixing bolts and the electromotor in gathering with приводными draughts.
  1. In case of need the electromotor can be removed with приводного the mechanism, - disconnect draught from the hinge and turn out bolts of fastening of the motor. The remained draughts in case of need as can are dismantled.
  1. Clear components приводного the mechanism and check up a condition of axes and hinges. Faulty components replace.
  2. Installation is made upside-down. Before assemblage grease mobile knots приводного the mechanism with silicone greasing. The description of procedure of installation of levers of screen wipers see Removal and installation of levers (leads) of screen wipers.

Cleaner of back glass (model of Hetchbek and Versatile person / Zafira)

 PERFORMANCE ORDER

  1. Remove the screen wiper lever (Removal and installation of levers (leads) screen wipers see).
  2. Remove panels of an internal upholstery of a door of a back (the Body see the Head).
  3. On models Astra remove the cylinder of the lock of a door (the Body see the Head).
  4. Disconnect from приводного the motor electroconducting.
  1. Turn out fixing bolts and remove the motor, having liberated the case of its axis from the rubber plug through passage in the external panel of a doorframe.


  1. In case of need take from the door panel the rubber plug through passage. The damaged plug is subject to replacement.
  1. Installation is made upside-down. Track, that all fixture has been tightened with demanded effort. The description of procedure of installation of the lever of a screen wiper see Removal and installation of levers (leads) of screen wipers.