Opel Astra, Zafira

Since 1998 of release

Repair and car operation



Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting/alarm devices
   Adjustment of a direction of optical axes of headlights
   Removal and installation of a combination of devices
   Removal and installation of components of the panel of devices
   Removal and installation прикуривателя
   Removal and installation of small horns of a horn
   Removal and installation of levers (leads) of screen wipers
   Removal and installation of elements of a drive of screen wipers
   Removal and installation of components of system of washing of glasses
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and audiosystem installation / the navigating block
   Removal and installation of elements of remote control by audiosystem functioning
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system and system иммобилизации the engine - the general information
   The gauge of speed of movement of the car (VSS) - the general information
   System of additional safety (SRS) - the general information
   Removal and installation of elements SRS
   Schemes of electric connections - the general information
   + Basic schemes of electric connections



Removal and installation of components of system of washing of glasses

The tank of a washing liquid

 PERFORMANCE ORDER

  1. Remove a forward bumper (the Body see the Head).
  2. Turn out fixing screws and remove локер protection of an arch of the left forward wheel (the Body see the Head).
  3. The tank is established behind internal section of a bumper. Get under the tank drain capacity.
  4. Disconnect electroconducting from the pump of giving of a washing liquid and take a socket aside.
  5. Disconnect from the pump a hose and merge the liquid rests in the prepared capacity.
  6. On the models equipped with the multipurpose display, disconnect electroconducting from the gauge of level of a washing liquid.
  7. On the models equipped with washers of lenses of headlights, disconnect electroconducting and a hose from the additional pump in the tank.
  8. Disconnect from the tank a jellied mouth.
  9. Liberate plaits of electroconducting from intermediate clamps on the tank case.
  1. Turn out fixing bolts and remove the tank from the seat under a bumper.
  1. Installation is made upside-down.

The pump of giving of a washing liquid

 PERFORMANCE ORDER

  1. Remove a forward bumper (the Body see the Head).
  2. Turn out fixing screws and remove локер protection of an arch of the left forward wheel (the Body see the Head).
  3. Get under the pump drain capacity.
  1. Disconnect an electric socket from the top party of the pump and take him aside.
  1. Disconnect from the pump a hose and merge a liquid in the prepared capacity.
  2. Having pulled upwards, liberate the pump from the rubber plug through passage in the case of the tank of a washing liquid.
  3. In case of need remove the plug through passage.
  4. Installation is made upside-down. In summary fill in in the tank a fresh cooling liquid (Routine maintenance see the Head).

Nozzles of giving of a washing liquid on a windscreen

 PERFORMANCE ORDER

  1. Remove rubber consolidation from an upper edge of a partition of an impellent compartment. Remove a plastic lattice from a reflector plate under a windscreen.
  2. Disconnect a hose from fixed in a reflector plate snuffled givings of a washing liquid.
  1. Accurately hooking a screw-driver, release plastic clamps and, having pulled downwards, liberate a nozzle from a reflector plate.
  1. Installation is made upside-down.

Nozzle of giving of a washing liquid on back glass

 PERFORMANCE ORDER

  1. On models of Hetchbek, accurately having hooked a small screw-driver, liberate a nozzle (1) of an aperture in the basis of the aerial (2) radio receivers.
  1. On models the Versatile person insert a small screw-driver into a backlash between a nozzle and a rubber sealing element. Wring out clamps and remove a nozzle from a doorframe.
  1. On models Zafira remove the top panel of an internal upholstery of a door of a back, then, having hooked a screw-driver, remove a nozzle of giving of a washing liquid.

    1 — the Nozzle
    2 — the Landing flange
    3 — Clamps

  1. Disconnect from a nozzle a hose.
  2. Installation is made upside-down.

Nozzles of giving of a washing liquid on lenses of headlights

 PERFORMANCE ORDER

  1. Remove a forward bumper (the Body see the Head).
  2. Release a clamp and remove a nozzle from a bumper.
  3. In case of need remove from an atomizer a transitive nozzle.
  4. Installation is made upside-down.