Replacement of epiploons of a cranked shaft
Right (from outside drive ГРМ) an epiploon
Engines of 1.7 l SOHC
Replacement of an epiploon of the oil pump (engines 1.7) see.
Engines of 1.7 l DOHC
Replacement of epiploons of a cranked shaft see.
Engines of 2.0 l
|
- Remove a pulley of a cranked shaft (Removal and installation of a pulley of a cranked shaft see).
|
- Having hooked a screw-driver with a flat sting, take an epiploon from a cover of a chain of drive ГРМ.
|
|
- Smooth out contact surfaces of a landing nest and a shaft pin, carefully having removed from them an agnail and the tease, capable to lead to failure of a new epiploon.
|
- Grease sealing sponges of a new epiploon with pure impellent oil and by means of cylindrical оправки in regular intervals запрессуйте an epiploon in a landing nest sponges inside and заподлицо with a cover surface.
|
|
|
In quality оправки the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter will approach, — track, that оправка rested only against rigid edge of an epiploon. |
|
- Remove traces of oil and establish into place a pulley of a cranked shaft (Removal and installation of a pulley of a cranked shaft see).
|
|
Left (from outside a flywheel) an epiploon
Engines of 1.7 l SOHC
Replacement of epiploons of a cranked shaft see.
Engines of 1.7 l DOHC
Replacement of epiploons of a cranked shaft see
Engines of 2.0 l
|