Opel Astra, Zafira

Since 1998 of release

Repair and car operation



Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Specifications
   System of antiblocking of brakes (ABS) and антипробуксовочная system (TCS) - the general information and codes of malfunctions
   Prorolling of brake system
   Check of a condition and replacement of brake lines and hoses
   Replacement колодок disk brake mechanisms of forward wheels
   Replacement колодок disk brake mechanisms of back wheels
   Replacement of boots of drum-type brake mechanisms of back wheels
   Condition check, removal and installation of a brake disk
   Removal, check of a condition and installation of a brake drum
   Removal, regenerative repair and installation of supports of disk brake mechanisms of forward wheels
   Removal, regenerative repair and installation of supports of disk brake mechanisms of back wheels
   Removal, service and installation of wheel cylinders of drum-type brake mechanisms of back wheels
   Removal and installation of the main brake cylinder
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning/tightness, removal and installation of assemblage of the vacuum amplifier of brakes
   Removal, check of serviceability of functioning and installation of the return valve of the vacuum amplifier of brakes
   Removal and installation of the vacuum pump of the servo-driver of the brake amplifier (diesel models)
   Check of serviceability of functioning of the vacuum pump of the servo-driver of the brake amplifier (diesel models)
   Adjustment of a drive of a lay brake
   Removal and installation of the lever of a lay brake
   Removal and installation of cables of a drive of a lay brake
   Removal, installation and adjustment of the gauge-switch of stoplights
   Removal and installation of the gauge-switch of a control lamp of raising of a lay brake
   Removal and installation of components ABS and TCS
   Removal, installation and adjustment of the valve-regulator of pressure in hydraulic contours of brake mechanisms of back wheels
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Removal and installation of the gauge-switch of a control lamp of raising of a lay brake

 PERFORMANCE ORDER

  1. Remove the central console (the Body see the Head).
  1. Disconnect from the lay brake of the gauge-switch established ahead of the lever electroconducting.

    Contact socket of electroconducting of the gauge-switch of a control lamp of raising of a lay brake
    1 — the Basic arm
    2 — the Fixing bolt
    3 — the Socket

  1. Turn out a fixing bolt and remove the gauge-switch from an arm in the basis of lever assemblage.
  2. Installation is made upside-down.