Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
Specifications
Removal and installation of a rotary fist
Check of a condition and replacement ступичной assemblages
Removal and installation of a forward stretcher
Removal, regenerative repair and installation of a rack of a forward suspension bracket
Removal and installation of the forward stabilizer of cross-section stability
Removal, regenerative repair and installation of the bottom lever of a forward suspension bracket
Replacement of the bottom spherical support
Removal and installation back ступичной assemblages
Check of a condition and replacement of bearings of back wheels
Removal, check of a condition and installation of the back shock-absorber
Removal and installation of screw springs of a back suspension bracket
Removal and installation torsion beams of a back suspension bracket
Replacement резинометаллических hinges of longitudinal levers torsion beams
System of adjustment of a road gleam of a back axis - the general information and adjustment
Removal and installation of the air valve and highway of a regulator of a road gleam of a back axis (model the Versatile person)
Removal and steering wheel installation
Removal and installation of a steering column
Removal, check of a condition and installation of an intermediate shaft of a steering column
Replacement of protective covers картера the steering mechanism
Removal and installation of the steering mechanism
Removal and installation of the steering pump
Removal of air from hydraulic path ГУР
Removal and installation of tips of steering draughts
Removal and installation of steering draught
Corners of installation of wheels
+ Body
+ Onboard electric equipment
|
Removal, check of a condition and installation of the back shock-absorber
|
|
For the purpose of preservation of characteristics of stability and controllability of the car replacement of back shock-absorbers should be made in steams. |
Removal
|
|
- Prop up forward wheels противооткатными boots, поддомкратьте a back of the car and establish it on props. Remove back wheels.
- On the models the Versatile person equipped with system of adjustment of a back road gleam uncover the right back combined lantern in a luggage space and through the valve pit pressure from system. Disconnect from the shock-absorber an air tube.
- Prop up the corresponding longitudinal lever of a back beam тележечным a jack.
|
- Turn out the bottom bolt of fastening of the shock-absorber to the lever.
- Holding the shock-absorber, turn out the top fixing bolt. Liberate the shock-absorber from the top basic arm.
|
|
|
Check
|
|
- Clamp the bottom basic arm of the shock-absorber in a vice with soft sponges and some times rock a rod from an emphasis against the stop. Any infringements of smoothness of a course of a rod specify in necessity of replacement of both shock-absorbers.
|
- Estimate deterioration degree резинометаллических shock-absorber plugs, in case of need make replacement of both shock-absorbers.
|
|
|
Installation
Installation is made in an order, the return to an order of dismantle of components.
|
|
- Track, that all fixture has been tightened with demanded effort. On the models equipped with system of adjustment of a back road gleam, charge system superfluous pressure 0.8 bar, then if it is necessary, adjust pressure according to degree of loading of the car.
|
|
|
|