Opel Astra, Zafira

Since 1998 of release

Repair and car operation



Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of a rotary fist
   Check of a condition and replacement ступичной assemblages
   Removal and installation of a forward stretcher
   Removal, regenerative repair and installation of a rack of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Removal, regenerative repair and installation of the bottom lever of a forward suspension bracket
   Replacement of the bottom spherical support
   Removal and installation back ступичной assemblages
   Check of a condition and replacement of bearings of back wheels
   Removal, check of a condition and installation of the back shock-absorber
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation торсионной beams of a back suspension bracket
   Replacement резинометаллических hinges of longitudinal levers торсионной beams
   System of adjustment of a road gleam of a back axis - the general information and adjustment
   Removal and installation of the air valve and highway of a regulator of a road gleam of a back axis (model the Versatile person)
   Removal and steering wheel installation
   Removal and installation of a steering column
   Removal, check of a condition and installation of an intermediate shaft of a steering column
   Replacement of protective covers картера the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Removal of air from hydraulic path ГУР
   Removal and installation of tips of steering draughts
   Removal and installation of steering draught
   Corners of installation of wheels
+ Body
+ Onboard electric equipment



Removal, check of a condition and installation of an intermediate shaft of a steering column


Knot of a joint of an intermediate shaft with entrance shaft of the steering mechanism

1 — the Coupling bolt

Removal

 PERFORMANCE ORDER

  1. Result forward wheels of the car in rectilinear position. Take the ignition key and block a steering wheel.
  2. Remove the bottom sections of furnish of the panel of devices and a sleeve of giving of air in a driver's foot well.
  1. Mark position of the top and bottom fixing knots of an intermediate shaft concerning a steering column and an entrance shaft of the steering mechanism (the Knot of a joint of an intermediate shaft with entrance shaft of the steering mechanism see an illustration).
  1. Compress a telescopic intermediate shaft and remove it with шлицов the steering mechanism and a column. Remove an intermediate shaft from the car.

Check

 PERFORMANCE ORDER

  1. Check up a shaft on presence of signs of mechanical damages of knots of a joint. In case of revealing of defects the shaft is subject to replacement in gathering.

Installation

 PERFORMANCE ORDER

  1. Make sure that the steering wheel and forward wheels of the car are in rectilinear position. Check up reliability of blocking of a steering column.
  2. Plant an intermediate shaft on шлицы an entrance shaft of the steering mechanism, - track correctness of combination of labels (at wrong installation of a shaft to insert a bolt it will not be possible). Slightly grease a carving part of a bolt fixing анаэробным with hermetic, fill a bolt in a collar and tighten with demanded effort.
  3. Fill the top end of a shaft in шлицы columns (again track correctness of combination of the components of adjusting labels put in the course of dismantle). Insert a bolt of a collar and reliably it tighten.
  4. Establish a sleeve of giving of air in a driver's foot well and the bottom sections of furnish of the panel of devices.