Opel Astra
+ Cars Opel Astra and Zafira
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
Specifications
Removal and installation of a rotary fist
Check of a condition and replacement ступичной assemblages
Removal and installation of a forward stretcher
Removal, regenerative repair and installation of a rack of a forward suspension bracket
Removal and installation of the forward stabilizer of cross-section stability
Removal, regenerative repair and installation of the bottom lever of a forward suspension bracket
Replacement of the bottom spherical support
Removal and installation back ступичной assemblages
Check of a condition and replacement of bearings of back wheels
Removal, check of a condition and installation of the back shock-absorber
Removal and installation of screw springs of a back suspension bracket
Removal and installation torsion beams of a back suspension bracket
Replacement резинометаллических hinges of longitudinal levers torsion beams
System of adjustment of a road gleam of a back axis - the general information and adjustment
Removal and installation of the air valve and highway of a regulator of a road gleam of a back axis (model the Versatile person)
Removal and steering wheel installation
Removal and installation of a steering column
Removal, check of a condition and installation of an intermediate shaft of a steering column
Replacement of protective covers картера the steering mechanism
Removal and installation of the steering mechanism
Removal and installation of the steering pump
Removal of air from hydraulic path ГУР
Removal and installation of tips of steering draughts
Removal and installation of steering draught
Corners of installation of wheels
+ Body
+ Onboard electric equipment
|
Removal and installation of the steering pump
Removal
|
|
- Remove a forward stretcher (Removal and installation of a forward stretcher see).
- Get under assemblage of the steering pump suitable drain capacity.
- Disconnect from pump assemblage of a tube of a high pressure, - for отпускания nuts штуцерных connections take advantage накидным of a key with a cutting head. In case of need cut off a tape collar of fastening of a returnable tube and replace it at assemblage carving.
- Disunite a contact socket of electroconducting, disconnect the grounding tyre, - try to remember a route of packing of a plait.
|
|
Burn down electroconductings tightly it is built in in the pump. |
|
- Give fixing nuts and remove the pump in gathering with a basic arm, a plait of electroconducting and the tank of a hydraulic liquid from a stretcher / картера the steering mechanism, - pay attention to type of an established tank - round (TRW) or angular (Delphi/Saginaw). Will pay also attention that on models to 2000 г вып. It is established двухштырьковый a contact socket, and after 2000 вып. - трехштырьковый. In case of need corresponding transitive the adapter always can be got in firm shop of autospare parts of company Opel.
|
|
- Give fixing nuts and remove the pump and directing plugs from an arm. Check up a condition of plugs, replace defective components.
|
|
Installation
|
|
- Establish the pump with plugs on a basic arm and tighten fixing nuts.
- Establish assemblage of the pump with an arm on a stretcher / the steering mechanism and tighten nuts of its fastening with demanded effort.
- Restore initial connection of electroconducting, - track correctness of a lining of a plait.
- Having replaced sealing rings штуцерных sockets, connect to the pump hydraulic tubes. Track reliability of a tightening штуцерных nuts, in case of need replace a collar of fastening of a returnable hose.
- Uncover the tank of hydraulic liquid ГУР and take the mesh filter. Wash out a grid and establish the filter back, then add in the tank necessary quantity of a fresh liquid of a demanded grade (Routine maintenance see the Head).
|
|
The hydraulic liquid merged from system is not subject to the repeated use! |
- Establish into place a forward stretcher (Removal and installation of a forward stretcher see).
- Pump over hydraulic system (Removal of air from hydraulic path ГУР see).
|
|
|
|